This large fibreglass pool resurfacing project in the town of Hedland took the team less than a week to complete.

Notice that we blanked off and re-positioned the skimmer box to the centre of the rear wall.

A pool renovation like this in the Pilbara can be tough due to the heat which is why we have big tarps and a large team to make sure the job is done right.

This is another shot of our large fibreglass pool renovation in the Pilbara town of South Hedland. The spa was difficult to renovate as there had been a previous attempt by another company that had failed. The paint was thick and hard to grind through.

Non skid surface is applied to the steps and edge beam for safety.

This Pilbara pool renovation is completed in the Aquaguard colour: Night Blue.

This fibreglass pool renovation project in South Hedland took the team 5 days to get this pool back in shape.

The shell had collapsed and the edge beam had broken in many places. We had to use an excavator with rock breaker attachment and bobcat  to remove the concrete surrounds.

We then dug out the sides to expose the outer supports and made our structural fibreglass repairs.

The top of the edge beam has not been finished as the customer is fitting pavers after the pool renovation.

This is the same pool renovation project in South Hedland but from a different angle.

You can see the condition of the pool from the picture on the left. The surface is very poor and required a lot of attention.

Our team are experienced in pools like this and enjoy the challenge. As you can see, the pool is now full of water and ready for the pavers to be installed.

For pool renovations and repairs in the Pilbara, be sure to choose the right company to do the job.